KM16.4D Hotplate Stirrer for Round Bottom Flasks
KM16.4D Hotplate Stirrer for Round Bottom Flasks
Volume: 100ml / 250ml / 500 ml
Temp: 450° C
Price: $801.00
Call 513-942-4007 or 888-249-4074 or email your order form to usasales@rosesci.com to place your order
Volume: 100ml / 250ml / 500 ml
Temp: 450° C
Price: $801.00
Call 805-709-1056 to Order
The precision CAT Scientific KM16.4D magnetic stirrer is equipped with a special heating block and flask container created just for Round Bottom Flasks. This is stainless steel construction designed to hold samples even in the event of flask cracks and leaks. Use it when stirring quantities from 100 to 500 ml and at temperatures to 450˚C.
The KM16.4D magnetic stirrer control panel is for quickly setting operating parameters simply by touching the control buttons to manage plate temperature, stirring RPM, Pt100 probe temperature, stirring time (1 to 999 minutes) and time remaining.
- Motor speed wheel for minimum to maximum (60 to 1600) RPM stirring action
- Unit is equipped with soft start to avoid splashing content out of the flask.
- Safety features, enhanced with the optional Pt100 temperature probe, guard against overheating, accidental loss or spillage of sample, software breakdowns byinitiating a controlled shutdown.
[wptabs]
[wptabtitle]Specifications[/wptabtitle]
[wptabcontent]
Type KM16.4D |
Specifications |
Mains |
110/230 Volt; 50/60 Hz (See rear panel) |
Display |
4 digit 7Segment-LED display |
Motor |
- split-pole, 25 Watts - 60 - 1100 min-1 - Softstart, microprocessor controlled - Temperature control - microprocessor controlled (PID Control) - Pt100 probe adjustable in 1°C Steps - Hotplate adjustable in 1°C steps up to 450°C - Programmable probe temperature (Pt100) - Programmable hot plate temperature - Programmable safety temperature |
Safety System |
Detects and protects against the following hazardous situations: - Hotplate failure (hotplate exceeds max. allowed temperature) - Probe failure (disconnection or break of Pt100 probe) - Detection of out-of-liquid condition, e.g. stirring vessel breaks - Differential safety cut-out (external probe senses an extreme drop in temperature of liquid being stirred/heated) - Triac failure |
Switch-off Time Delay (Timer) |
Programmable switch-off time delay Min. delay: 1 minute Max. delay : 999 minutes |
Temperature Sensors |
Hotplate: Thermocouple External: Platinum Resistance Sensor (Pt100) Setpoint resolution hot plate 1°C / 1K (1°F in Fahrenheit Mode) Setpoint resolution Pt100 Probe 1°C / 1K (1°F in Fahrenheit Mode) |
Motor Speed Resolution |
10 min-1 |
Hot Plate Material |
Aluminum |
Hot Plate Dimensions |
Ø 90 mm round - km16.4d |
Heating Power |
500 Watts |
[/wptabcontent]
[wptabtitle]Accessories[/wptabtitle]
[wptabcontent]
Accessories
The following accessories are available for the KM16.4D:
- Pt100 Temperature Probe (CAT No: 60278) $147.00
- Probe Stand (CAT No: 20669) $37.00
- Probe Clamp for Pt100 (CAT No: 8B005624) $37.00
- Crossover Stirrer Clamp (CAT No: 60492) $47.00
- Stirring Bar Extractor: 150mm / 10mm dia. (CAT No: SBE8B037202) $27.00
- Stirring Bar Extractor: 200mm / 10mm dia. (CAT No: SBE8B037204) $27.00
- Stirring Bar Extractor: 250mm / 10mm dia. (CAT No: SBE8B037206) $27.00
- Magnetic Stirring Bar Set - 12 pc. (CAT No: SB8B00000) $107.00
[/wptabcontent]
[wptabtitle]Articles[/wptabtitle]
[wptabcontent]
Useful Articles:
- Key Components of Magnetic Stirrers
- Take Control: A Digital Magnetic Hotplate Stirrer Gives You the Power
- Using a Precision Temperature Probe with Your Round-Bottom Hotplate Stirrer
- Safety Tips for Round-Bottom Hotplate Stirrers
- Magnetic Hotplate Stirrer Safety
- Can Your Magnetic Hotplate Stirrer Interface with a PC?
- Laboratory Basics 101: The Magnetic Hotplate Stirrer
- Temperature Probe Use with Your Digital Hotplate Stirrer
- What Are the Advantages of a Digital Programmable Hotplate Stirrer?
- How to Choose the Right Magnetic Stirrer for Cannabis Concentrates
[/wptabcontent]
[wptabtitle]Downloads[/wptabtitle]
[wptabcontent]
Downloads
KM16.4D Instruction Manual
[/wptabcontent]
[wptabtitle]Description[/wptabtitle]
[wptabcontent]
Need short- or long-term stirring when your samples are in round-bottom flasks? The answer is the precision CAT KM16.4D magnetic stirrer equipped with a special heating block and flask container created just for that purpose. Use it when stirring quantities from 100 to 500 ml and at temperatures to 450˚C. Of stainless steel construction the container is designed to hold samples in event the flask cracks and starts to leak.
The KM16.4D magnetic stirrer control panel is a study in simplicity. One read through the comprehensive instruction manual and you can quickly set operating parameters all shown on the 7-digit liquid crystal display. Simply by touching the control buttons you are in charge of plate temperature, stirring RPM, Pt100 probe temperature, stirring time (1 to 999 minutes) and time remaining. Use the motor speed wheel for minimum to maximum (60 to 1600) RPM stirring action. The unit is equipped with soft start to avoid splashing content out of the flask.
Safety features, enhanced with the optional Pt100 temperature probe, guard against overheating, accidental loss or spillage of sample, software breakdowns and similar events by initiating a controlled shutdown of the unit.
Check our further details on the CAT KM16.4D magnetic stirrer for round bottom or three-necked flasks and contact us if you have questions.
[/wptabcontent]
[/wptabs]