MCS78 Programmable Hotplate Magnetic Stirrer – old


MCS78 Programmable Hotplate Magnetic Stirrer

Volume: 10l
Hotplate: CERAN
Price: $1,286.25

[wptabs]
[wptabtitle]Description[/wptabtitle]
[wptabcontent]

CAT MCS78 Magnetic Hotplate Stirrer

One look at CAT Scientific’s sleek-looking, multi-tasking, 10-liter capacity MCS78 Magnetic Hotplate Stirrer with its rugged Ceran hotplate will convince you that this is truly a professional laboratory instrument.

The clearly labeled, position-adjustable control panel presents all the programming functions and options you need to accomplish virtually any hotplate stirring requirements that come along.

Just use the relevant buttons to establish your desired operating parameters and see them clearly shown on the easily viewed graphic display and brilliantly illuminated LEDs.

Moreover, with CAT Scientific’s “Shake and Stir” software along with CAT’s Pt100 temperature probes you can efficiently operate and monitor several units at the same time – and enjoy a tremendous boost to your lab’s efficiency.

If the features and benefits offered by the CAT MCS78 sound good to you, read on!

The CAT MCS78 – Everything You Need in a Magnetic Hotplate Stirrer

We’ve put CAT Scientific’s top engineering and design talent to work. They developed a magnetic hotplate stirrer that can handle the most demanding processing tasks found in today’s R&D and pilot plant operations.  The result?

  • A multi-tasking hotplate stirrer with 600 watts heating power and a 4-step timer system allowing for the generation of user-defined temperature and stirring profiles.
  • Set temperatures 20⁰C to 440⁰C in 1⁰C increments; speeds soft-start 60-1600 rpm.
  • For each timer step the following parameters can be set: hotplate and sensor temperature, motor speed and temperature-slope.
  • Algorithms to reach the programmed temperatures as fast as possible but with minimal overshoot.

——————————

Select the Specifications tab for the MCS78 technical specifications

As always we’re ready to answer your questions on magnetic mixers or any other equipment in the CAT Scientific family of laboratory equipment or contact us with a detailed inquiry.

[/wptabcontent]
[wptabtitle]Specifications[/wptabtitle]
[wptabcontent]

Type MCS78
Specifications
Electrical Power Requirements
110/230 Volts; 50/60 Hz (see type label on rear panel)
Display
Bright, backlit LCD display, showing all relevant system data
Hotplate
MCS78: Ceran Hotplate
Heating Power
MCS78: 600 watts
Motor Specification
• Shaded-pole motor Power:
• 25 Watt
• Adjustable speed
• Microprocessor controlled speed control
• Adjustable speed range: 60 … 1600min-1
• Setting accuracy: 10min-1
• Speed control stability:+/- 20min-1
• Soft motor start
• Adjustable safety stir function
• Recommended stirring bar: -Length: 60mm (min: 30 … max: 70mm),
-Diameter: 8mm (min: 5 … max: 12mm)
Temperature Control
• Microprocessor controlled – fuzzy logic
• Adjustable hotplate temperature
• Programmable hotplate temperature
• Programmable Pt100 probe temperature
• Programmable safety temperature
• Programmable temperature ramp rate 1°C/hour to 440°C/hour
Safety Functions
• Programmable hotplate safety temperature (without Pt100)
• Programmable probe safety function (with Pt100)
• Detects and protects against the following hazardous situations:
    o Hotplate failure (hotplate exceeds max. allowed temperature)
    o Pt100 probe failure (disconnection or break of Pt100 probe)
    o Heating stage failure
    o Extreme rise or fall of temperature of the external Pt100 probe, e.g. drop out of the Pt100 probe or breakage of the glass (Differential Alarm)
    o Liquid detection of the Pt100 probe at switch on of the heating function (Out of Liquid)
    o Internal overheating of the device
Timer
• Adjustable switch off time
• Adjustable time range: 24:00:00 h:m:s
• Setting accuracy: 1 min
• Multitimer function
Measuring Sensor For Medium
Platinum resistance temperature probe
Auxiliary Functions
• Two point calibration for external Pt100 probes
• User programmable maximum hotplate temp. (20-440°C) / MCS67
Setting Accuracy
0.5 °C
Temperature Deviation With Pt100 Probe
± 0.3 °C
Permissible Ambient Temperature
5 – 40 °C
Permissible Humidity
80 % RH
Safety Class Acc. To DIN 40050
IP32 (according DIN 40050)
Hotplate Dimensions
180 x 115 x 250 mm (B x H x T)
Weight
3,9 kg

[/wptabcontent]
[wptabtitle]Accessories[/wptabtitle]
[wptabcontent]

Accessories

All accessories are included with the MCS78

[/wptabcontent]

[wptabtitle]Articles[/wptabtitle]
[wptabcontent]
Useful Articles:


[/wptabcontent]

[wptabtitle]Downloads[/wptabtitle]
[wptabcontent]

Downloads

MCS78 Instruction Manual
[/wptabcontent]

[/wptabs]